Remove D5, D8, and R10. Also remove the jumper between XG1 and XG2.
Replace D8 with a 1K resistor.
Run a length of wire from XG1 to the right hole of D5.
Run a wire from the bottom hole of R10 to the top of R11.
Run a 750 ohm to 1K, 1/4 watt resistor from the right (5v) side of R23 to the negative (top) leg of D17.
Run a wire from the negative leg of D17 to X11
Toimiiko nuo modaukset volvon hallijakajalla ja vakio syttyosilla? mega 1 v2.2