Ok. Jännä ku lupailevat että minkä vain sais toimimaan ohjelmoimalla. Ja mittari on varmasti ehjä? Pitäs jossain toisessa autossa testata...
Joo vikavaloja tuli paljon mullakin ku alko akku loppupaan. Nollaus ja kaikki hävis.
Pavel oli yön aikana vastannut:
The additional wiring (two new CAN bus wires) has to be perfectly working, otherwise VDASH cannot talk to the new TFT DIM, it cannot reprogrammed, etc. Check the wires with the car electrician to see where the problem is. You might try to check the voltage on the new pins (it shall be around 1.6-2V), the pins must be perfectly fit into a white housing (the blue notch must fit too). Double-check, triple-check if the wires are not swapped (we had one customer who found this out after three iterations).
Rarely, the new TFT DIM might be faulty.