Kuvassa näyttääkin heti korkeammalta ja jannu väittää että tän kanssa 190mm korkea mahtuu ok.
https://www.drive2.ru/l/10615734/Mutta mitähän ihmeen höpinää tuo käänteinen polariteetti
Onko joutunut asentaa toisin päin sen akun
”Even in winter, when I took off the battery for recharging, I noticed that a small amount of water had accumulated under it. The problem seems to be in the sealing lid of the lid - in a couple of places they were torn up. From the sealant it only got worse: the elastic bands contracted.
In principle, you can probably choose a suitable seal, but the message on the profile forum has led me to replace the cover with a new one.
Link: xc60-club.ru/xcforum/topi...indComment&comment=253093
The number of the new cover 31335286, cost 2259 rubles.
The battery has gone for the third year and the probability of its refusal, beginning with the next winter, is quite high (especially with my short trips once a week). This cover allows you to install a battery of increased height - 190 mm instead of the regular 175 mm, and thus expand the list of suitable batteries.
Just in case, I note that the size of the regular battery - 353h175h175, after the update can be put and 353h175h190. Polarity is inverse.
The new lid got up without any problems, as if it were.”