Joo, jossain neuvotaan että riisinjyvän verran tulis laittaa mutta se nyt on kyllä aivan liian vähän. Jotain artic cooling mx4 laitoin, mahtaako olla johtamatonta, en muista.
Kävin tuossa pojan pelisession keskellä tiedustelemassa lämpöjä niin 49deg oli. Huoneessa tosin 28deg.. Aiemmin tänään ajoin prime95 niin kyllä ne lämmöt nousi yli 90 kun useamman minuutin antoi paahtaa mutta erot oli pienemmät eikä tuuletin ulvonut niin pahasti. Normikäytössäkin puhisee nyt vähemmän. Opin myös että uusimpia Inteleitä ei sais ajaa ku prime95 26.6 versiolla, ei uudemmalla koska lämmöt nousee silloin epärealistisen korkeiksi. Lisäksi, vain Intel tietää mitkä niiden prossujen tj.max on eli applikaatiot voivat vain veikata missä lämmöissä sakkaa. Ilmeisesti ne tj.max on selvästi yli sata. Ja kuulemma tarkimmat lämpötulokset antaa joku inteleille suunniteltu diagnostiikka applari jonka nimi unohtu jo.
Tompan rautasivustolta:
Do NOT use any Prime95 versions later than 26.6. Here's why:
Core i 2nd, 3rd and 4th Generation CPU's have AVX (Advanced Vector Extension) instruction sets. Recent versions of Prime95 run AVX code on the Floating Point Unit (FPU) math coprocessor, which produces unrealistically high temperatures. The FPU test in the software utility AIDA64 shows the same results.
Prime95 v26.6 produces temperatures on 3rd and 4th Generation processors more consistent with 2nd Generation, which also have AVX instructions, but do not suffer from thermal extremes due to having a soldered Integrated Heat Spreader and a 35% larger Die.
Please download Prime95 version 26.6 -
http://windows-downloads-center.blogspot.com/2011/04/pr...
Please run only Small FFT’s for 10 minutes.
Your Core temperatures will test 10 to 20C lower.
Please read this Tom’s Sticky: Intel Temperature Guide -
http://www.tomshardware.co.uk/forum/id-1800828/intel-temperature-guide.html