-1-2-2 Outside temperature sensor open circuit or shorted to 12V
-2-3-1 Ventilation damper motor position sensor open sircuit or shorted to 12V
-2-3-3 Floor-defrost damper motor position sensor open circuit or shorted to 12V
-4-1-4 Driver's side passenger compartment temperature sensor intake fan sticking
-4-1-7 Passenger side passenger compartment temperature sensor intake fan sticking
ompas siinä litaniaa kerrakseen

Ilmastoinnin 414 ja 417 koodit viittaa ilmeisesti näihin? http://www.vrcf.fi/foorumi/index.php?topic=190.0
Juu kyllä liittyy

Noiden haistelijoiden puhdistus kannattaa aina, ovat varmaan ihan täynnä moskaa jos ei ole ikinä puhdistettu, mulla ainaki oli

Puhdistaa noi ja nollaa vikakoodit ja katselee ja kuuntelee mitä tapahtuu. Jos valot alkaa taas vilkkua niin vika voi olla tosiaan myös säätöpaneelissa eikä esim noissa läppäservoissa tai lämpötila-anturissa

tässä nyt kuitenkin noihin koodeihin jelppiä jos oletetaan että säätöpaneeli on kunnossa:
Vikakoodi 1-2-2 Outside temperature sensor. Open-circuit or short-circuit to supplyConditionIf signal from outside temperature sensor is missing or is shorted to 12 V, the control unit will record the fault and store the DTC.
Possible sourceBreak in outside temperature sensor or wire, or wire shorted to 12 V.
Fault symptom(s)Fault warning to driver. LEDs by A/C and REC buttons flash for 20 sec.
Substitute value Control unit cuts out the faulty signal and substitutes a preset replacement value equivalent to 0 °C.
Vikakoodi 2-3-1 Outside temperature sensor. Open-circuit or short-circuit to supplyConditionif signal from damper motor position sensor is missing or is shorted to 12 V, the control unit records the fault and stores the DTC.
Possible sourceShort or open circuit in wire. There may also be an open circuit in the position sensor.
Fault symptom(s)Fault warning to driver. LEDs by A/C and REC buttons flash for 20 sec.
Control unit ignores the faulty signal from the damper motor position sensor, but makes up for the loss as follows:
Substitute value For DTC 2–1–1 and 2–2–1
-Control unit only changes the damper position if the temperature switch for that side is changed. If the temperature switch is move, the damper is moved a corresponding amount.
Substitute value For DTC 2–3–1 and 2–3–3
-The control unit uses a substitute value corresponding to a setting of 100 % defrost on the air distribution switch.
Substitute value For DTC 2–3–5
-The control unit uses a substitute value equivalent to a setting of 0% recirculation on the air distribution switch.
Vikakoodi 2-3-3 Outside temperature sensor. Open-circuit or short-circuit to supplyConditionif signal from damper motor position sensor is missing or is shorted to 12 V, the control unit records the fault and stores the DTC.
Possible sourceShort or open circuit in wire. There may also be an open circuit in the position sensor.
Fault symptom(s) Fault warning to driver. LEDs by A/C and REC buttons flash for 20 sec.
Control unit ignores the faulty signal from the damper motor position sensor, but makes up for the loss as follows:
Substitute value For DTC 2–1–1 and 2–2–1
-Control unit only changes the damper position if the temperature switch for that side is changed. If the temperature switch is move, the damper is moved a corresponding amount.
Substitute value For DTC 2–3–1 and 2–3–3
-The control unit uses a substitute value corresponding to a setting of 100 % defrost on the air distribution switch.
Substitute value For DTC 2–3–5
-The control unit uses a substitute value equivalent to a setting of 0% recirculation on the air distribution switch.
Vikakoodi 4-1-4 Driver's side passenger compartment temp. sensor intake fan. SeizedConditionIf the signal to the intake fan integral with the passenger compartment temperature sensor is blocked, the GND will exceed the permitted level. The control unit records the fault and stores the DTC.
Possible sourceFault in sensor fan or fan blade stuck.
Fault symptom(s)Fault warning to driver. LEDs by A/C and REC buttons flash for 20 sec.
Vikakoodi 4-1-7 Passenger's side passenger compartment temp. sensor intake fan. SeizedConditionIf the signal to the intake fan integral with the passenger compartment temperature sensor is blocked, the GND will exceed the permitted level. The control unit records the fault and stores the DTC.
Possible sourceFault in sensor fan or fan blade stuck.
Fault symptom(s) Fault warning to driver. LEDs by A/C and REC buttons flash for 20 sec.
Eli kuten nyt huomata saattaa niin ainoa järkevät vikakoodit on oikeastaan noi haistelijat, voi toki lämpötila-anturikin olla kaput mutta noiden servomoottoreiden toimimattomuuteen en oikein jaksa uskoa vaikka se mahdollista onkin. lähtisin itse tosiaan liikkeelle säätöpaneelista kun se näistä tuppaa ensiksi luovuttamaan

Kaikkea jännää tuo ECC näyttää tekevän kun jokin komponentti hajoaa, laittaa läpät näköjään tiettyyn asentoon ja olettaa lämpötilan nollaksi ja vaikka mitä

kaikkea sitä oppii vadista lukemalla
